-
On receipt of appointment, we commence coordination with vessel’s agents to ascertain the date and time of vessel’s arrival at port and subsequent berthing / operations.
-
Inspection of Holds and Hatches of the vessel before loading of nominated cargo to ensure cleanliness and suitability of the same.
-
Inspection of the cargo in stowage prior discharge to ascertain if any apparent damage, shifting, contamination and / or infestation that may have occurred in stowage or during the voyage. Lashings, proper placement of dunnage shall also be checked during such inspection as well as to inspect that improper or unsuitable various cargoes has not been stowed together.
-
Conduct a Draught survey for bulk loading / discharges to determine quantity of cargo loaded / discharged on/ from the vessel. Intermediate Draught surveys can also be conducted for determination of quantity of cargo on board vessel.
-
Carry our pre-shipment and or after loading samples of the cargo. Progressive sampling of cargo during loading can also be carried out as and when it is required. All sampling shall be carried out as per the prescribed industry standards detailed in ISI, ASTM or any other International standards depending upon the cargo.
-
Supervision of standardization of cargoes, as and when required.
-
Supervision of delivery of the cargo from port premises or from warehouses in trucks, rail wagons and or barges. The carriers will be inspected to handle the nominated cargo.
-
Weighment of trucks over nominated weighbridge shall be followed by a challan issued by us recording the gross, tare and nett weight of the same. In case of standardized cargoes a physical count shall also be mentioned in the challans.
-
On Hire / Off Hire surveys of vessels can be conducted as a stand alone assignment detailing the hull damages, certifications, gear available and the bunkers on delivery / redelivery of the same.
-
Bunker supply surveys can also be conducted to determine ROB [Remaining on Board] as well the quantity of bunkers supplied to a vessel. Inspection to be carried along with the Engineer of the vessel, the sounding of fresh water, lube Oil, tank to be taken using vessels tank calibration and assess the quantities of the respective tanks, allowing for trim and list, additional check, if quantities carried in drums.
-
Pre-shipment carting supervision of cargoes is conducted to determine their condition prior to loading and issue protest to shippers in case any damages are noted prior loading.
-
General average survey and investigation to marine causality.
-
We can also determine the yield of husked & milled rice by means of mechanical shelling & milling device. Same time, the viscoelastic properties at various stages of cooking.
-
In addition to the above, the test can be done for the general, organoleptic, health, physical &chemical characteristics in terms of moisture & bulk density for wheat so as to ascertain the quality & impurities in the product.
|
|